1, Specification of wheel alignment clamp
Application | All wheel alignment machine | Clamping size | 11-24 inch rim
|
Target hole diameter | Hole Φ15mm or with bolt Φ12mm | Accumulative tolerance | ≤0.20mm |
Raw material | Alu, steel, plastic | Color | Grey, red,etc
|
N.W | 20KGS/CTN | G.W | 25KGS/CTN |
Package | 4PCS/CTN | One set incl. | 4pcs clamps |
2, Characters of 3D wheel alignment clamp:
● The wheel clamp is easy to handle, light weight and high strength.
● The demanding surface treatment to prevent damage and corrosion, like hard-chromed rods, plated screw rod, strictly processed aluminium blocks.
● Two clamps higher and two clamps lower.
3. Use instructions:
• Open the box and take out the 3D wheel clamps.
• Loose the locking pin, install the target and tight the locking pin.
• Turning the handle in the end to adjust clamp to suitable size.
• Put the 4 fingers onto 4 points on the rims, please pay more attention for the fingers, to make sure the fingers touch the rim correctly.
• Turn the handle in the end to tight the total clamp
• Shake the clamp to make use it tight touch on the rim.
• Then you can perform your wheel alignment test.
